daily maintenance of shenzhen jingdiao cnc machine tools-尊龙人生就要博旧版

scope of milling machine maintenance operation
1. cleaning of the bed and its components, cleaning of iron filings and sanitation of the surrounding environment< br/>
2. check each oil level, not lower than the oil mark, and add lubricating oil to each part; xk754a; horizontal cnc bed milling machine

3. cleaners, clamps, measuring tools< br/>
scope of milling machine's first maintenance operation
1. clean and adjust the workbench, screw handle, and column inlay< br/>
2. check and adjust the clutch< br/>
3. clean the three-way guide rail and felt, and clean the inside and outside of the motor, machine tool, and accessories< br/>
4. check the oil circuit and add lubricating oil to all parts< br/>
5. tighten all screws< br/>
milling machine maintenance operation scope

1. cleaning of the bed and its components, cleaning of iron filings and surrounding environmental hygiene, cleaners, clamps, and measuring tools< br/>
2. check each oil level, not lower than the oil mark, and add lubricating oil to each part< br/>
scope of weekend maintenance work for milling machines

1、 cleaning
1. disassemble and clean all oil felt pads< br/>
2. wipe each sliding surface and guide rail surface, wipe the workbench and horizontal, lifting screw, wipe the tool transmission mechanism and tool holder< br/>
3. wipe off all dead corners< br/>
2、 lubrication
1. clean and unobstructed oil holes and add lubricating oil< br/>
2. add lubricating oil to each guide rail surface, sliding surface, and screw< br/>
3. check the fuel tank body and oil level of the transmission mechanism, and add oil to the elevation position< br/>
3、 tighten

1. check and tighten the pressure plate and inlay screw< br/>
2. check and tighten the fixing screws of the slider, the tool transmission mechanism, the handwheel, the workbench bracket screws, and the fork top screw< br/>
3. check and tighten other loose screws< br/>
4、 adjust

1. check and adjust the belt, pressure plate, and inlay strip for appropriate tightness< br/>
2. check and adjust the slider and screw assembly< br/>
5、 anti corrosion

1. remove rust from all parts, protect the painted surface from collision< br/>
2. stop using, spare equipment guide rail surfaces, sliding screw handwheels, and other exposed areas that are prone to rusting should be coated with oil for corrosion prevention< br/>
&nbsp;